SEE WHAT'S NEW AT MAXIM
OIL & CHEMICAL:
NEW AND IMPROVED:
MAXUS NC TAP w/ MoS2
Chlorine Free Tapping / Threading Compounds with
Molybdenum Disulfide (MoS2)
MAXUS NC TAP w/
MoS2 are multifunctional compounds developed specifically for cutting, tapping,
reaming, and threading operations on ferrous metals. These non-petroleum,
polymeric-ester-based products demonstrate high film strengths and outstanding
wetting properties. MAXUS NC TAP contains Extreme Pressure components,
including MoS2, for increased tool-life and a superior finish on
difficult-to-machine alloys. Maxus NC Tapping Compounds are not formulated
using chlorinated extreme pressured additives.
MAXUS GS8 PREMUIM CUTTING and GRINDING FLUID
MAXUS GS8 represents the next
generation of Maxim's GS series of water-extendable metalworking fluids.
For enhanced environmental acceptance, MAXUS GS8 is formulated without the use
of DEA, DCHA, formaldehyde, or formaldehyde-releasing biocides. When mixed
with water, MAXUS GS8 forms a trans-lucent emulsion that exhibits excellent
cooling properties for superior finishes and increased tool-life. MAXUS
GS8 is suitable for the machining and grinding of ferrous and most non-ferrous
AUTOMAX METALWORKING OILS
AUTOMAX represents a line of
multi-purpose, light colored cutting fluids specifically designed for use in the
machining of ferrous and non-ferrous alloys where the use of oils containing
"active sulfur" may result in the staining of non-ferrous parts and machine-tool
components. Automax oils are not formulated using chlorine additives.
combination of extreme pressure sulfurized polymeric olefins and friction-modifying
compounds promote optimum performance while exhibiting improved environmental
conditions for operators such as lower oil-mist as well as improved thermal
stability and lower smoking tendencies. Automax oils are available in seven
DURAHONE HH - TUBE HONING OIL
DURAHONE H-H is a low-viscosity
petroleum-based oil formulated expressly for the precision tube-honing
operations of ferrous metals and alloys.
With a minimum flash point of
275F, Durahone HH is not regulated by
DOT. DURAHONE H-H minimizes
the danger of incidents due to combustion or combustion vapors, thereby
increasing operator health and safety ....While lowering costs of compliance and
effectiveness of its high-detergency characteristics protects against
hone-loading while maintaining a very low evaporation rate. Honing oil
composition and viscosity stay virtually constant.
SDS+GHS is HERE!!!!
Maxim is in the process of replacing MSDS(s) with HAZCOM SDS+GHS in
compliance with the coming HAZCOM/GHS requirements. The first "roll-out"
of SDS' will be around February 1, 2015. This will include most
metalworking oils, hydraulic/machine oils, most rust preventives, etc.
Water-extendible metalworking fluids, soaps, and soluble rust preventives will
follow as they are published.
06/01/2016 UPDATE: Full
Container labeling, updated to include GHS formatted information will follow
HAZCOM 2012/GHS useful links /
HAZCOM GHS- Whitepaper (
from JJ Keller)
HAZCOM GHS- Sample
pictorials and descriptions
Lee's list of useless information. I am frequently asked for these
measurements and or equations.....
For additional information,
product samples, etc., please contact;
OIL & CHEMICAL COMPANY
latest revision 2016
herein is believed to be correct and reliable. However, Maxim
Petrochemical Corporation does not assume liability for it or for
recommendations of our representatives inasmuch as conditions and methods of use
are beyond our control. Further, we make no warranty, expressed or
implied, of any kind regarding those products or their use and purchaser assumes
all risks of use or handling either in accordance with directions or not
The information and
recommendations contained herein are, to the best of the knowledge and belief of
Maxim Petrochemical Corporation, accurate and reliable as of the date issued.
Maxim does not warrant or guarantee their reliability, and Maxim shall not be
liable for any loss or damage arising out of use thereof.
The information and
recommendations are for the user's consideration and examination.
Conditions of use are beyond Maxim's control and therefore users are responsible
to verify this data under their own operating conditions to determine whether
the product is suitable for their particular purposes and they assume all risk
of their use, handling, and disposal of the product(s). This information
relates only to the product(s) designated herein and does not relate to its use
in combination with any other material or in any other process.