 |
INDUSTRIAL METALWORKING LUBRICANTS |
|
|
|
Phone: 817-293-4645 |
FAX: 817-293-4646 |
||
|
|
|||
| ||||||||||
|
The
DURACUT LINE of transparent cutting
oils comprise a series of clear to light amber, premium quality, " active
" sulfo / chlorinated metalworking oils. Each
DURACUT oil is specially formulated
using a carefully balanced blend of lubricating additives, highly refined
sulfurized fats and chlorinated extreme pressure compounds in various
combinations to promote optimum performance in the specific service for which
each is recommended. Anti-mist
additives are utilized in products with finished viscosities below 200 SUS @ 100
deg.F to suppress fogging and all DURACUT
TRANSPARENT CUTTING OILS contain rust inhibitors to provide protection for
machined pieces
and machine tools alike. A
blend of severely hydrotreated napthenic and neutral base stocks are
incorporated in the DURACUT line of
transparent cutting oils and exhibit characteristics such as thermal stability
in high speed machining as well as lower smoking tendencies.
They also have very low pour points to facilitate handling at lower
temperatures. DURACUT TRANSPARENT CUTTING OILS
are designed to provide long tool life and superior finish in all types of
machining operations on ferrous metals, from free machining steels . . . to the
most difficult to machine alloys. PRODUCTS DURACUT 110-C,
180-C, and 220-C.-
General
purpose cutting oils for ferrous metals in normal machining operations.
An excellent choice when working carbon or free machining steels or for
use in light machining on alloy steels. DURACUT 250-C, 320-D, and 340-C.- These metalworking oils will satisfy 80% of all ferrous metal machining requirements and are recommended for a superior finish on most metal alloys.
DURACUT 320-C .- with a viscosity of 140 SUS @ 100 deg.F is recommended over
DURACUT
340-C
.- where a light viscosity oil with high active sulfur/chlorine
content is required. An excellent
choice for most machining operations including threading, lathe work, drilling,
planing, shaping and many hobing and broaching operations. DURACUT 380-C and 410-C.- This group of oils exhibit the highest content of sulfo-chlorinated extreme pressure additives in MAXIM's standard metalworking oil line. These oils are recommended for use in operations involving the most difficult to machine alloys including stainless, titanium and high nickel steels in such difficult operations as gear hobing and internal broaching. These oils are also recommended for the threading of pipe with outside diameters larger than 3 inches.
ADVANTAGES
PHYSICAL AND CHEMICAL PROPERTIES
DURACUT TRANSPARENT CUTTING OILS
contain various amounts of "active" sulfur.
Therefore, these active sulfo/chlorinated oils are not recommended for
non-ferrous metals such as copper, brass, or bronze. In such applications, please contact your MAXIM
representative for data information on: DURACUT
DUAL / TRI PURPOSE METALWORKING OILS. These
Duracut cutting oils contain various amounts of chlorinated paraffin as an
active extreme
The chlorinated paraffins used in these products are not presently regulated
or labeled hazardous. However; under specific conditions during use or disposal, it
is suspect that chlorinated paraffins, in a state of decomposition, could form
minute amounts of chlorines with known hazards. Please read Where
the use of chlorinated paraffin containing compounds is of particular concern,
ask for the
DURACUT OILS are available in 55 gallon steel drums, totes and bulk quantities.
For additional information,
product samples, etc., please contact;
MAXIM
OIL & CHEMICAL COMPANY Fort
Worth Texas Metro
(817) 293-4645
latest revision 2009
DISCLAIMER Information contained herein is believed to be correct and reliable. However, Maxim Petrochemical Corporation does not assume liability for it or for recommendations of our representatives inasmuch as conditions and methods of use are beyond our control. Further, we make no warranty, expressed or implied, of any kind regarding those products or their use and purchaser assumes all risks of use or handling either in accordance with directions or not MANUFACTURER DISCLAIMER The information and recommendations contained herein are, to the best of the knowledge and belief of Maxim Petrochemical Corporation, accurate and reliable as of the date issued. Maxim does not warrant or guarantee their reliability, and Maxim shall not be liable for any loss or damage arising out of use thereof. The information and recommendations are for the user's consideration and examination. Conditions of use are beyond Maxim's control and therefore users are responsible to verify this data under their own operating conditions to determine whether the product is suitable for their particular purposes and they assume all risk of their use, handling, and disposal of the product(s). This information relates only to the product(s) designated herein and does not relate to its use in combination with any other material or in any other process. |
|
