| |
|
DURACUT DUAL / TRI PURPOSE
DATAFILES
METALWORKING
OILS |
|
DURACUT
DUAL / TRI PURPOSE OILS
are a line of multi-purpose cutting fluids of the
non-staining type. They are
specifically designed for use in the machining of non-ferrous metals where the
use of
"active
sulfur' containing cutting oils result in the staining of machined copper parts.
DURACUT
DUAL PURPOSE OILS
are designed for use as both a cutting oil and a machine
tool lubricant These oils
incorporate sulfurized fats and chlorine additives that are effective in
reducing friction on the part / tool interface while remaining inactive
(non-corrosive) in the machine tool lubrication system under conditions normally
encountered.
The
non-corrosive feature of these oils makes them well suited for the machining of
copper and its alloys as well as a variety of operations on ferrous metals where
machinability requirements range from mild to moderately severe.
DURACUT DUAL PURPOSE OILS also contain additives to control misting.
The
use of DURACUT DUAL PURPOSE OILS in multi-spindle automatic screw machines, as
both cutting oil and lube oils, is most effective where dilution of the cutting
fluid by the oil from a leaking lube oil system is encountered.
These dual purpose
oils are not intended for use in hydraulic systems with pumps and pressures and
speeds requiring the use of an ant-wear type hydraulic oil.
|
PHYSICAL AND CHEMICAL PROPERTIES
| DURACUT |
300-M |
310-D |
315-D |
316-D |
317-D |
318-D |
| Item
Number |
04030 |
04033 |
04034 |
04134 |
04035 |
04037 |
| Appearance |
Amber |
Amber |
Dark Amber |
Dark
Amber |
Dark
Amber |
Dark Amber |
| Flash
Point,COC F |
>350 |
>350 |
>350 |
>350 |
>350 |
>350 |
| Specific
Gravity, 60F |
.87 |
.87 |
.88 |
.88 |
.88 |
.88 |
| Viscosity,
SUS @ 100F |
135 |
160 |
180 |
250 |
290 |
400 |
| Sulfur,
% Total |
0.5 |
0.5 |
1.0 |
1.25 |
1.0 |
0.5 |
| Sulfur,
% Active |
nil |
nil |
nil |
nil |
nil |
nil |
| Chlorine,
%
|
0.5 |
0.5 |
0.5 |
1.5 |
1.5 |
2.0 |
| Fatty
Oils, % |
2.5 |
2.5 |
8.0 |
8.0 |
8.0 |
12.0 |
DURACUT TRI-PURPOSE OILS are transparent, bright colored oils
that are rust and oxidation inhibited and
are non-corrosive to copper. In
automatic machine tools, the mixing of cutting oils (particularly those that
contain "active" sulfur and fatty oils)
with lubricating and hydraulic oils can have serious consequences. These problems can be avoided in many applications by using
DURACUT TRI-PURPOSE OILS as they be used as cutting oil, machine tool lubricant,
and as hydraulic oil. These are
true multi-purpose oils designed for all three lubricant applications.
DURACUT DUAL and
TRI-PURPOSE OILS are similar in strength of EP levels in that the tri-purpose
oils are suited for the machining of ferrous and non ferrous alloys of light to
moderate machining requirements. These
oils also contain additives to resist oxidation as well as to suppress misting.
PHYSICAL AND CHEMICAL PROPERTIES
| DURACUT TRI-PURPOSE |
155-C |
170-C |
| Item
Number |
04030 |
04032 |
|
Appearance |
Clear |
Clear |
|
Flash
Point, COC F |
>350 |
>350 |
|
Specific
Gravity, 60 F |
.87 |
.87 |
|
Viscosity,
SUS @ 100 F |
180 |
250 |
|
Sulfur,
% Active |
nil |
nil |
|
Chlorine,
% |
2.0 |
2.5 |
DURACUT OILS
are available in 55 gallon steel drums, totes
and bulk quantities.
|
 |
Shipping
Identification / labeling:
PETROLEUM
PRODUCTS,
CLASS
65, NMFC 1552 50 |
For additional information,
product samples, etc., please contact;
MAXIM
OIL & CHEMICAL COMPANY
Fort
Worth Texas
Metro
(817) 293-4645
DISCLAIMER
Information
contained herein is believed to be correct and reliable. However,
Maxim Petrochemical Corporation does not assume liability for it or for
recommendations of our representatives inasmuch as conditions and methods
of use are beyond our control. Further, we make no warranty,
expressed or implied, of any kind regarding those products or their use
and purchaser assumes all risks of use or handling either in accordance
with directions or not
MANUFACTURER DISCLAIMER
The information and
recommendations contained herein are, to the best of the knowledge and belief of
Maxim Petrochemical Corporation, accurate and reliable as of the date issued.
Maxim does not warrant or guarantee their reliability, and Maxim shall not be
liable for any loss or damage arising out of use thereof.
The information and
recommendations are for the user's consideration and examination.
Conditions of use are beyond Maxim's control and therefore users are responsible
to verify this data under their own operating conditions to determine whether
the product is suitable for their particular purposes and they assume all risk
of their use, handling, and disposal of the product(s). This information
relates only to the product(s) designated herein and does not relate to its use
in combination with any other material or in any other process. |
