MAXIM
premium-quality anti-wear hydraulic oils are designed to meet the most
stringent requirements of most major manufacturers and users of hydraulic
equipment. The five grades meet
the viscosity requirements of essentially all hydraulic systems.
MAXIM hydraulic oils are effective in reducing vane and gear pump wear
in systems operating at high loads, speeds and temperatures.
Its specialized additive makeup also allows the use of MAXIM hydraulic
oils in severe service hydraulic systems employing axial and radial piston
pumps. Maxim premium anti-wear hydraulic oils are double inhibited
for extended oxidation protection.
MAXIM
hydraulic oils are characterized by outstanding oxidation resistance and
corrosion protection; excellent thermal and hydrolytic stability, low pour
points, foam resistance and the demulsibility required in fluids used in
modern high pressure hydraulic systems. They
are non-corrosive to metal alloys, except those containing silver and are
fully compatible with common seal materials. For Zinc free (ashless) anti-wear
hydraulic oils, please ask for our Z.F. Anti-Wear oils in common ISO grades.
TYPICAL
ANALYSIS
| Item
Number |
01030 |
01032 |
01034 |
01036 |
01037 |
|
Viscosity
Grade (ISO) |
32 |
46 |
68 |
100 |
150 |
| Gravity,
API (D-1298)(minimum) |
32.0 |
31.0 |
30.7 |
29.6 |
28.8 |
| Viscosity,
SUS @ 100F (D-445) |
155 |
220 |
330 |
495 |
750 |
| SUS
@ 210F (D-445) |
45 |
48 |
55 |
60 |
7
5 |
| Viscosity
Index |
105 |
105 |
105 |
95 |
95 |
| Pour
Point, deg.F |
-35 |
-20 |
-17 |
-10 |
-5 |
| Flash
Point, deg.F |
430 |
>480 |
>480 |
>480 |
>480 |
| Color,
ASTM (D1500) |
1.0 |
1.0 |
1.5 |
2.0 |
2.0 |
| Demulsibility,
(D1401) 40-40-0(min) |
pass |
pass |
pass |
-- |
-- |
| Oxidation(D
943) Hrs to 2.0 |
2400+ |
2400+ |
2400+ |
-- |
-- |
| TAN,
1000 hrs. (D 4310) |
0.4 |
0.4 |
0.5 |
0.6 |
0.6 |
| Corrosion
Test, (ASTM D 665B) |
pass |
pass |
pass |
pass |
pass |
| Hydrolytic
Stability
(D 2619) Cu
mass loss mg/cm (2.0 max) |
.15 |
.15 |
.15 |
.15 |
.15 |
MAXIM
hydraulic oils are formulated in suitable viscosity grades to meet or exceed
the requirements for industrial and mobile hydraulic systems which call for:
| Vickers I-286-S, M 2950-S |
Abex-Denison HF-2, HF-0 |
| DIN 51524, Part 2 |
Cincinnati Milacron P-68,P-69,P-70 |
| GM Ox |
U.S. Steel 126,136,137 |
| Ford M-6C32 |
Racine, variable volume vane pumps |
| |
except PM500 series silver containing pumps. |
PACKAGING:
Available in 55 gallon steel drums and bulk quantities.
For additional information,
product samples, etc., please contact;
MAXIM
OIL & CHEMICAL COMPANY
Fort
Worth Texas
Metro
(817) 293-4645
DISCLAIMER
Information contained
herein is believed to be correct and reliable. However, Maxim
Petrochemical Corporation does not assume liability for it or for
recommendations of our representatives inasmuch as conditions and methods of use
are beyond our control. Further, we make no warranty, expressed or
implied, of any kind regarding those products or their use and purchaser assumes
all risks of use or handling either in accordance with directions or not
MANUFACTURER
DISCLAIMER
The information and
recommendations contained herein are, to the best of the knowledge and belief of
Maxim Petrochemical Corporation, accurate and reliable as of the date issued.
Maxim does not warrant or guarantee their reliability, and Maxim shall not be
liable for any loss or damage arising out of use thereof.
The information and
recommendations are for the user's consideration and examination.
Conditions of use are beyond Maxim's control and therefore users are responsible
to verify this data under their own operating conditions to determine whether
the product is suitable for their particular purposes and they assume all risk
of their use, handling, and disposal of the product(s). This information
relates only to the product(s) designated herein and does not relate to its use
in combination with any other material or in any other process.
